Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
1 x eTronix Pulse EX2 Sport - 2 Channel 2.4Ghz Radio Set #ET1060 | |
1 x EP Super Duty 3000mAh NiMh Stick Pack - 7.2v - Tamiya Connector #SCH-EP3000S | |
1 x Tamiya NiMh/NiCd 650mAh Fast Trickle Charger - UK Plug #OL-3334 | |
1 x Power HD 1812MG Waterproof Metal Geared Servo - 18kg - 0.12s #HD-1812MG |
saving you £41.29 over RRP!
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
1 x HPI Plazma 1.5V Alkaline AA Battery (4Pcs) #HPI-101939 | |
1 x eTronix Pulse EX2 Sport - 2 Channel 2.4Ghz Radio Set #ET1060 | |
1 x Voltz 5300mAh NiMh Stick Pack - 7.2v - Tamiya Connector #VZ0025 | |
1 x Savox SW0231MG+ Waterproof Metal Gear Digital Servo - 15kg - 0.17s #SAV-SW0231MG+ | |
1 x Ansmann Tamiya AC/DC Delta 3 Fast NiMh Charger #HC-AC3001 |
saving you £46.88 over RRP!
An M Revolution!
This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers a responsive drive and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. CVA oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Featured Components
笳舟onocoque frame chassis (with detachable lower section) 笳臭ong suspension arms 笳修VA oil dampers 笳洲ull ball bearings 笳秀ear differential unit 笳酋niversal drive shafts 笳秋i-torque servo saver
- Left: Long arms and steering linkage components optimize damper leverage ratio. The chassis' camber can also be adjusted.
- Right: Adjust the M-07 Concept's rear toe angle via the insertion of spacers where the suspension mount parts are attached.
- Left: One of the key points is the easy-access differential unit, which can be removed and changed from the underside.
- Right: Enjoy silky-smooth power from your chassis thanks to full ball bearings, universal drive shafts and gear differential unit.
Specifications
笳臭ength: 332mm (including bumper) 笳集idth: 164mm 笳集heelbase: 225mm or 239mm (Selectable) 笳舟onocoque Frame 笳洲ront-Midship Motor, Front-Wheel Drive 笳秀ear Differential 笳-Piece Steering Tie-Rod 笳-Wheel Independent Double Wishbone Suspension 笳修VA Oil Dampers 笳秀ear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears) 笳蹴equires an Electronic Speed Controller (sold separately)
Separately Required Items
笳州ody 笳週ype 540 Motor 笳週ires 笳-channel R/C system with ESC 笳州atteries for transmitter 笳州attery Pack and Charger
This item is over £100, so qualifies for free standard UK shipping!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Carpet can be quite subjective, I'd recommend checking what your local club members are running?
Answered by: Ben @ Wheelspin Models
This will need a round case lipo like this SCH-CR293
Answered by: Steve @ Wheelspin Models
This is mainly an on road car you could put some rally tyres on it to work as a rally car.
Answered by: Si @ Wheelspin Models
Only with different bodies and tyres.
Answered by: Steve @ Wheelspin Models