ETRONIX PULSE GFSK EX2 SPORT 2.4GHZ WHEEL 2CH RADIO SYSTEM
Etronix's new EX2 Sport radio control system uses the latest in 2.4ghz radio technology to ensure that each transmitter's frequency remains secure from external interference.
Ideally suited to r/c car and boat applications.
Pulse EX2 Sport Features:
- 2.4GHz Crystal Free
- 2-Channel
- Low voltage warning: Yes (less than 9V)
- Easy to use Control for Basic Models
- Throttle Position Neutral Failsafe
- RF power: Less than 20dbm
- Modulation: GFSK
- Code type: Digital
- Sensitivity: 1024
- Servo Reversing
- DSC port: Yes (3.5mm)
- Weight: 328g
- DSC Port for Simulator use
- Steering Dual Rates
- 3-Channel Receiver
- Charging Jack
What chargeable battery pack and charger would fit this transmitter please?
Asked by Jason Caine on 25th November 2017
There's no pre-made pack available, however we'd use high capacity rechargeable AAs such as HPI-101938 and a charger like O-FS-NX83
Answered by: Ben @ Wheelspin Models
Hi Ive just bought a rc truggy and range isnt very good is there an easy way to increase range
Asked by Steven Reece on 22nd February 2018
Depends what radio system is included with your car... most modern 2.4ghz systems will have a range of at least several hundred meters - range isn't an issue we hear of these days.
Answered by: Ben @ Wheelspin Models
Can this be binded to multiple receivers? So I can use one radio across a few models. Thanks
Asked by Sam on 26th January 2019
These are a basic radio so don't have model memory to use with multiple models I'm afraid.
Take a step up to say something like KNNS0001 or AB-2000002 for a bit more functionality like that.
Answered by: Ben @ Wheelspin Models
Does this come with servos
Asked by Rob on 10th November 2019
No this system does not come with any servos in the package.
Answered by: Anthony @ Wheelspin Models
If I buy a secondary receiver, can I use the same transmitter as one already in use with another car? As in bind to 2? Thanks
Asked by Barnaby on 28th February 2020
You can, but you'd need to re-bind it every time. These are basic transmitters without "model memory"
Answered by: Ben @ Wheelspin Models
Hi can you tell me if this will work with a r/c tomerhawk car please.
Asked by James Dore on 12th May 2020
Should work with pretty much any car yes
Answered by: Ben @ Wheelspin Models
i need a new transmitter for a hpi savage any recommendations will i need a new receiver as well
Asked by Ian Stephenson on 23rd May 2020
This will work in a Savage, or any car for that matter...
Answered by: Ben @ Wheelspin Models
have you any recievers tat are compatable with acoms dr 224
Asked by Maureen on 17th August 2020
Afraid not sorry
Answered by: Ben @ Wheelspin Models
Hi, I have this transmitter and receiver. Currently they will not bind, potentially there maybe a fault with the receiver. If I bought a replacement receiver should it bind OK with the transmitter?
Asked by Steve Clemente on 17th September 2020
Yes it should do. Replacement receivers are ET1095
Answered by: Ben @ Wheelspin Models
Do you sell charger cables for the handset
Asked by Shane on 31st December 2020
Yes you could use O-FS-NX83
Answered by: Ben @ Wheelspin Models
If i got out driving and I have the same transmitter as some one else will there be connection issues to other cars
Asked by Lewis Paul on 28th February 2021
No they will run together fine
Answered by: Ben @ Wheelspin Models
Will this work with ftx torro nitro
Asked by Joshua on 7th March 2021
Yes
Answered by: Ben @ Wheelspin Models
what range in metres does a pulse EX2 have please ??
Asked by Alan on 4th April 2021
They don't quote a range - but it's likely to be a kilometre or so
Answered by: Ben @ Wheelspin Models
Hello, Can I pair this with a Hobbywing 1/18 EZRUN Esc and a Ikonnik Receiver. I need to change transmitters so I can reverse the steering servo action. Thanks
Asked by Chris on 7th April 2021
No it won't pair to that receiver, but it does include a reciever that you could swap out.
It'll work fine with any ESC
Answered by: Ben @ Wheelspin Models
Hi will this be ok to use on a FTX carnage 2.0?thanks Dan
Asked by Daniel O on 17th April 2021
Yes
Answered by: Ben @ Wheelspin Models
Will the 2.4Ghz controller work with older Futaba servos?
Asked by Nick on 15th May 2021
It should do yes.
Answered by: Ben @ Wheelspin Models
What batteries does the eTronix Pulse EX2 Sport - 2 Channel 2.4Ghz Radio Set need
Asked by Paul on 29th July 2021
This uses 8 AA type batteries.
Answered by: Anthony @ Wheelspin Models
Does this operate on fhss or afhss or anything else
Asked by Terry Hayles on 7th October 2021
The modulation spec on the website says GFSK
Answered by: Anthony @ Wheelspin Models
What is range for controller
Asked by Colin on 8th August 2022
100-150 meters
Answered by: Frank @ Wheelspin Models
Hi, I need to replace the radio/transmitter on my Revo 3.3 5308, wondering if this works and if there is any recommendation of a more suitable one? Thank you!
Asked by Diogo Pinheiro on 11th August 2022
That will not work as you need to be able to have a reverse switch ..depending on the age and variant of revo you have you will probably need this
TRX6530
Answered by: Steve W @ Wheelspin Models
Is this suitable for the tamiya mo5 mini cooper
Asked by Stuart on 9th October 2022
Yes this will work for you.
Answered by: Si @ Wheelspin Models
Can you recommend additional receivers that will work with this transmitter (I know I will have to rebind each time I use a different receiver but I have several vehicles I want to be able to control from this transmitter)
Asked by Wes Marks on 15th December 2022
Yes thats this one ET1095
Answered by: Steve @ Wheelspin Models
Hi would this work on my old hot bodies nitro buggy as hitec ranger 2n as broken
Asked by Chris Turner on 11th January 2023
Yes this will work for you no problem.
Answered by: Si @ Wheelspin Models
could you please tell me what is the range on these please I have this with my fix carnage 2.0 and I have recently put in a 4600 kv motor with a 60amp esc and a 3s lipo and want to know the range before I go doing speed runs but can't find any info on these
Asked by Jack on 15th January 2023
This is a fairly basic handset so it would be around 100mtrs, for what you are doing we would advise a much better handset something like P-CB3PV
Answered by: Si @ Wheelspin Models
I have a Hobao Hyper GT and looking for the receiver and transmitter to work with my 14.4v car
Asked by Gary Radford on 16th April 2023
Any transmitter and receiver will work for you as the ESC has a BEC that will power the receiver at 6v.
Answered by: Si @ Wheelspin Models
i need a new handset for an old Ftx Vantage,the pull up aerial has snapped,will this item work with it.
Regards Mark
Asked by Mark Hamilton on 25th June 2023
Yes this will work for you.
Answered by: Si @ Wheelspin Models
Is this suitable for 3s lipo ?
Asked by Michael on 30th July 2023
This transmitter will only run on 8x aa batteries.
Answered by: Steve @ Wheelspin Models