Force is a far eastern Nitro Engine manufacturer that supplies Nitro engines to many a well know RC brand. Got a HPI vehicle? Is the engine an "F", well the "F" stand for Force...
This is superb value, No other Nitro engine of this size is available at this price. Superb quality internals and compatibility with current roto starts and pull starts make Force the only choice.
Using standard clutch set up and mounting locations make this a drop in fit for the HPI Savage Nitro versions.
Suitable for...
- Pretty much any 1/8th Nitro car!
- Hyper 7
- Hyper 8
- HPI Savage .21 .25 SS 4.6 X
- Hong Nor X1 CR / CRT
- Schumacher Fusion
- Schumacher Menace
- Schumacher Havoc
- Schumacher Swift
- Thunder Tiger EB4
- Thunder Tiger MTA/4
- Associated MGT
Some vehicles may require alternative engine mounts though it is 100% straight fit in the HPI Savage. Replacement Force .28 Nitro Engine To fit Most 1/8th Scale Nitro Chassis.
Perfect Replacement Nitro Engine for HPI Trophy buggy etc. Force Nitro Engine Are High Quality And are used in Many RTR Models Around The World.
Force 28 Features:
- Bore - 18.68
- C.C. - 4.58
- Output - 2.9(PS) @ 32000rpm
- Practical RPM range - 2,000~32,000
- Stroke - 16
- Type - 28 ABC, rear exhaust, pull start,
- Weight - 480g
- Brand: Force
- Part No: 4476540
- Barcode: 5051121114829
- Displacement: 4.6cc (0.28ci)
- Starter: Pull Start
Free UK Delivery!
This item is over £100, so qualifies for free standard UK shipping!
We Ship Worldwide!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No product reviews yet!
Hi, do you also stock a Roto start back plate for this engine please?
Asked by Adrian Hutchence on 8th March 2020
Yes, FT02623F or HPI-87130 will fit
Answered by: Ben @ Wheelspin Models
Can you recommend a motor to replace 5.9 on my savage
Asked by Herbert on 11th June 2020
This would fit. As would the F5.9 HPI-117259
Answered by: Ben @ Wheelspin Models
Hi would this be a straight fit for hyper vs. 21 3 port, and which back plate would be none pull start for this engine, Thanks
Asked by Imran on 21st June 2020
Yes that should work fine.
I don't know to a non-pullstart backplate though
Answered by: Ben @ Wheelspin Models
Hi just a few questions.
1 what glow plug would be suitable
2 what nitro fuel
3 can you use a box start on this engine.
4 would hyper 21 3 port clutch and flywheel fit this engine.
5 would I need to change my engine mount for my hyper vs
Thanks
Asked by Imran on 26th June 2020
- Plugs we'd use say FAST760-4 or HPI-1503
- Fuel we'd use Opti 25 OP1008 or OP1009
- Yes, no reason why you cannot use a starter box
- Yes that clutch should fit fine
- No, engine mount should be fine
Answered by: Ben @ Wheelspin Models
Hi dose this Carb need a Venturi
Asked by Imran on 3rd July 2020
Not required no
Answered by: Ben @ Wheelspin Models
Will this engine replace the S25 unit in a savage 25 and will the roto start bolt straight on?
Asked by Ben on 27th July 2020
Yes that should fit in there. It's a force engine so yes if you have an 87130 style roto start (force) then it should fit
Answered by: Ben @ Wheelspin Models
will this fit the Hong Nor Ultra LX2 buggy?
Asked by Manminder Matharu on 30th October 2020
We don't sell Hong Nor so I can't confirm 100% - but these are standard big block size engines so yes I am pretty sure they will fit
Answered by: Ben @ Wheelspin Models
Hello,
I have a force 32 on my buggy and the piston is damaged in the motor, will this motor just fit straight on with the clutch and mounting plate taken off the force 32 engine. Thank you.
Asked by Robert on 29th November 2020
Yes that should be a direct swap
Answered by: Ben @ Wheelspin Models
Hello,
Does the engine come with any medium hot glow plug?
Thank you.
Asked by Robert on 1st December 2020
Officially they do not include a glow plug. (However, we often find one in the box!)
Answered by: Ben @ Wheelspin Models
Would this fit the HPI Trophy Buggy? Would I need an alternative engine mount?
Asked by Michael Traynor on 13th February 2021
Yes that should drop in
Answered by: Ben @ Wheelspin Models
Hi i have this engine and would like to fit it in my savage 21 what roto start system will i need thanks
Asked by Darren on 17th May 2021
FT02623F would work, or HPI-160060 is a better system - but would just require HPI-107829 one way bearing
Answered by: Ben @ Wheelspin Models
What’s the factory settings for this please I can’t find them anywhere
Asked by Scott Chadwick on 27th March 2022
We'd usually start at 3.5 turns out on the High Speed Needle and go from there. You'll probably find that is a rich setting, so better to be too rich than too lean.
Answered by: Ben @ Wheelspin Models
Is the flywheel and clutch etc avalible also pls
Asked by Andrew Hope on 18th May 2022
This one will work fine with that engine
wheelspinmodels.co.uk/i/72673/
Answered by: Steve W @ Wheelspin Models
Will this work as a direct replacement for a XTM XT2 .21 engine.
Asked by Joe Hanson on 17th September 2023
This is a big block engine so would be a good replacement but may require some minor adjustment to the standard mounts to fit.
Answered by: Si @ Wheelspin Models
Will this be a straight fit onto the hpi truggy F4.6
Asked by Aaron on 11th December 2023
Yes this will be a direct fit
Answered by: Si @ Wheelspin Models
Would this fit in a hpi savage x
Asked by John Walton on 28th December 2023
Yes it will fit.
Answered by: Steve @ Wheelspin Models