Novak Hacon 1S / SS Pro Brushless System - 13.5T

by Novak

Normally: £179.39

Web Price: £168.63

Seen it cheaper?
Let us price match!
Price Match Request
Web Link:

Note: Price matches will only be considered against valid, in stock products in the UK. Although we can match 99% of prices, some exceptions will apply. Full Terms

Part Number: NE3071
Stock Status: Out Of Stock What's this Mean?
Notify Me When In Stock
We'll email you as soon as this item is available:

To complement an R/C segment that emphasizes low racing expenses, Novak introduces the economical, easy-to-use Havoc 1S/SS Pro Brushless Systems – 10.5T, 13.5T & 17.5T (#3070-#3072). Drivers can now ditch the pricey two-cell and above Li-Po packs, and sport the first speed control with specialized internal Novak Smart Boost™ circuitry. This innovative technology allows drivers to power their vehicle’s electronics on a single 1S Li-Po battery pack without installing additional external boosters or receiver packs. The ingenious Havoc Sport 1S Brushless/Brush ESC (#1731), which is also available individually, simplifies installation and operation, cuts down on vehicle maintenance, and, most importantly, ensures that your vehicle’s electronics are powered properly. This ESC is ideal for beginners and local, club-level racers, and will excel in the Oval, World GT and 12-Scale racing segments.

The Havoc 1S ESC has also been combined with Novak’s tried-and-true SS Pro Brushless Motors. These popular sensored, spec motors offer a world-class racing experience at an affordable price. The SS Pro motors are ROAR-approved, and feature a nickel-plated sintered Neodymium rotor, a shielded sensor cable, color-coded timing rings and a rebuildable design.

In addition to Novak’s embedded Smart Boost™ technology, the Havoc 1S offers a simple interface, making the ESC completely programmable with a vast number of customization opportunities. One parameter, in particular, is Novak’s Throttle Curve that gives drivers the ability to experiment with two throttle responses that range between a quick burst of power to a smoother, more controlled low-end power delivery. In addition, the Havoc’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. Moreover, Novak has also built into the ESC a 1S Li-Po Cut-Off Circuitry feature, which prevents the battery from going below the critical safety voltage level. For further racing opportunities, Novak installed a Reverse Disable feature to turn the Havoc 1S into a forward-only brushless system for club-level racing.

The Havoc 1S also includes a Novak Glitch Buster Capacitor (#5626) to eliminate noise generated from the servos.

The Havoc 1S ESC and SS Pro motors contain Thermal Overload Protection circuitry to protect the system from overheating and damage. In fact, the ESC will only operate with brushless motors that have built-in thermal protection that follow ROAR guidelines, such as Novak’s new Ballistic Brushless Motors (#3603-#3621). This sophisticated feature ensures a fun day at the track without the worry of overheating. For the complete list of compatible motors, click here.


Fully programmable, user-friendly interface with nine adjustable parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings from 0-27%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-5%), Throttle Curve (Linear and Expo), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Li-Po Cut-Off via Novak’s One-Touch™ button
Novak’s One-Touch Set-Up™ for quick, easy transmitter setup
Novak’s Smart Braking II™ enables users to "shift" from forward to reverse
Water-resistant case with gasket seal
Sensor-based for excellent braking and low-speed driveability
Nickel-plated, high-strength sintered rotor for increased motor acceleration, improved initial throttle response, improved performance in high-temperature conditions and natural drag brake
Glitch Buster Capacitor (#5626) included to eliminate noise generated from servos
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Auto Detect Brushed Motor Mode
Locked Rotor Detection and Thermal Overload Protection
ROAR and IFMAR approved
RoHS compliant and includes 120-Day Warranty
All Novak brushless motors are designed and assembled by Novak in Irvine, Calif. Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each motor meets Novak’s rigid specifications

This item is Listed in the following categories:

When a choice of colours is offered for a product, we will endeavor to fulfill your first request, but regret that this is not always possible and colours may vary on these items. Images are for illustration purposes only and whilst provided in good faith, may be incorrect. Prices quoted are valid for online purchases only and may be lower than those advertised in-store. E&OE. Currency conversions are given as an approximation only. All transactions will be processed in GBP. We advise you to research all part numbers before ordering to ensure compatibility with your model.