Hobbywing EZRun MAX8 G2 ESC Features:
- The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice, and snow, water accumulation.
- Built-in ultra-powerful switch mode BEC with a continuous current of 6A, an instant 15A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
- Equipped with the most advanced and safe electronic switches. The traditional mechanical switch protects and prevent dust, humid and other harsh environments, contact rust, and violent impact (such as flying slope landing) caused by the automatic closure of mechanical switches and other issues.
- Support the 32 degree turbo timing setting. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%, easily win your rival. • Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection.
- Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
- Real-time data logging to view various running data on the HW LINK app using the OTA Bluetooth module.
- Support the firmware upgrade of the ESC (The multi-function LCD G2 program box or OTA Programmer is needed to purchase), you can enjoy the latest functions.
Hobbywing EZRun MAX8 G2 ESC Specifications:
Scale Vehicles: 1/8th
Cont./Peak Current: 160A / 1050A
Motor Mode: Sensored and sensorless brushless motor
Input: 3-6S Lipo
Motor Limit: 4S Lipo: KV≤3000; 6S Lipo: KV≤2400 4278 size motor
BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 10A (Switch-mode)
Programming Port: Share with Fab interface
Switch Mode: Electronic Switch
Capacitor protection: Yes
Waterproof: Yes
Size (L.W.H) mm: 60(L) x 48(W) x40.5(H) mm
Weight (g): 192g
Input/Output: Input:XT90 Output:6.5mm gold plug(female)
Motor Features:
- Advanced Sensored brushless technology
- Waterproof, advanced sensored motor
- Designed for SPEED & POWER
- Aggressive Launch
Motor Specifications:
Pole: 4
KV(No-load): 2250KV
R. (Ω): 0.0048Ω
Current No-load(A): 5.0A
Motor D.&L(mm): 42mm / 78mm
Shaft D.&L of the projecting part(mm): 5mm / 18.5mm
LiPo(S): 3-6S Lipo
Weight (g): 455g (no wire)
Applicable: 1/8 truck, crawler
Best match with: MAX 8 G2 ESC
Free UK Delivery!
This item is over £100, so qualifies for free standard UK shipping!
We Ship Worldwide!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
No product reviews yet!
Do you need to solder this?
Asked by James Backwith on 19th October 2022
No this is pre soldered with xt90 connectors on it.
Answered by: Steve W @ Wheelspin Models
What’s the difference between the Max8 and the Max8 G2 ?
Asked by Cameron Robertson on 11th November 2022
The g2 is the latest version :)
Answered by: Frank @ Wheelspin Models
Hi can you buy this with ec5 plugs
Asked by Steven Rees on 1st March 2023
No, this is only available with the XT90 connectors
Answered by: Si @ Wheelspin Models
Hi have you got this combo with the g2 motor thanks
Asked by Steven on 8th March 2023
Yes this one HW38010404
Answered by: Steve @ Wheelspin Models
Hi will this work in a hobao hyper ss
Asked by Steven on 28th November 2023
Yes this would work in that car for you.
Answered by: Si @ Wheelspin Models
Hi can i put a single 6s battery on this or 2 3s
Asked by Steven on 3rd January 2024
It will run with either but you would need a loop connector to run one battery if it has 2 connectors.
Answered by: Steve @ Wheelspin Models
Hello there, I’m thinking to get the Hobbywing Max 8 G2 Esc and motor for a 1/8 Eachie EAT02 would you recommend it and if so what battery’s should I get?
Asked by Calum Wells on 10th March 2024
I am sorry we do not know that vehicle but this is a very good 1/8 brushless system and we recommend 2x 3s lipos like this SCH-CR780
Answered by: Steve @ Wheelspin Models
Can I fit this in an ftx zorro.
Asked by Ian Fox on 15th April 2024
No, this is for a 1/8th scale car. you can look at something like this for the Zorro HW38020344
Answered by: Si @ Wheelspin Models
