FEATURES
Ideal for 1/10 scale off-road applications
Hard plastic case
4mm bullet connectors
ROAR approved
INCLUDES
Two 3.7V Modules with 4mm Bullet Connectors
One set of 4mm male bullet Connectors
Jumper Cable with 4mm Male Bullets to wire the two modules in series
REQUIREMENTS
Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the TrakPower VR-1 Dual Racing Charger, TKPP5000
or the Duratrax Onyx 225, DTXP4225
SPECIFICATIONS
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 5200mAh
Max Recommended Charge Current: 1C (5.2A)
Continuous Discharge: 100C (520amps)
Pack Dimensions: 1.9 x 0.99 x 2.7" (47 x 25 x 70mm)
Weight: 9.7oz (275g)
Watt Hours: 19Wh each module, 38 watt hours total
Discharge Connector: 4mm Bullet Connector
COMMENTS
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
ALWAYS keep out of reach of children
ALWAYS set charger to 3.7V per cell
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 3.2V per cell
NEVER disassemble or modify pack in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.