The MULTIGyro G3 has been developed specifically for R/C fixed-wing model aircraft and automatically stabilises the model. You instantly fly more accurately and safely! The model's familiar flying characteristics are virtually unchanged, but it flies much more smoothly, more precisely, and is less susceptible to weather-induced and aerodynamic influences. The triple-axis stabilisation system is suitable for all current types of fixed-wing aircraft, including: Normal aircraft, V-tail and delta/flying wings. A special feature of the MULTIGyro G3 is its three modes of operation. The gyro can be switched between OFF, Normal (damping) and Heading-Hold (stabilisation) from the transmitter using a free channel. Normal mode virtually eradicates the effect of wind and turbulence on the model (wind eliminator), whereas Heading-Hold mode enables the model to maintain the last commanded flight attitude until the pilot gives a further control command. Torque-rolls and hovering become child's play. Gyro gain can be adjusted separately for each primary axis (elevator, rudder and aileron) on the device itself. In this way the model can be set up accurately to suit your preference. Installing the MULTIGyro G3 could hardly be simpler, and only takes a few minutes.
Multiplex Multigyro G3 3-Axis Gyro 75505 Key Features:
What's in the Box:
Multiplex Multigyro G3 3-Axis Gyro 75505 Tech Specs:
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Yes, it'll work fine with a FASST receiver.
Answered by: Ben @ Wheelspin Models
Yes, this would work with either.
Answered by: Ben @ Wheelspin Models
Yes, this would work on electric or IC
Answered by: Ben @ Wheelspin Models
Yes, it will work with any model
Answered by: Ben @ Wheelspin Models
This will not work with 2 servos in to the unit but you could use a Y lead on the servos.
Answered by: Si @ Wheelspin Models
Yes this has heading hold.
Answered by: Steve W @ Wheelspin Models
Yes if it is a standard receiver not SAFE or AS3X .
Answered by: Steve @ Wheelspin Models
Yes that gyro will work with most brands of receiver.
Answered by: Steve @ Wheelspin Models