Ideal for 1/10 scale off-road 4WD buggies
Two 3.7V Modules, Jumper Lead with 4mm Male Bullets to wire the two
modules in series and 2mm Female Bullet for Balancing
LiPo compatible charger and balancer
Rated Pack Voltage: 7.4V (each module is 3.7V)
Max Recommended Charge Current: 1C (5.4A)
Continuous Discharge: 60C (336 amps)
Watt Hours: 40
Pack Dimensions: 0.9 x 1.8 x 2.7" (25.1 x 47 x 69mm) each module
Weight: 11.3oz (321g)
Discharge Connector: 4mm Female Bullets
Balance Connector: 2.5mm Female Bullet located on jumper wire
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
Royal mail at £3.50, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.