The convenience and performance of brushless technology is available for everyone with the Photon Sensorless Waterproof System from Etronix. Simple to set-up and with a range of sensible KV rated motors for most r/c car applications and abilities the Photon is the ideal brushless start-up package or upgrade from a stock brushed set-up. An ideal choice for any 1/10th buggy, truggy, short course or truck application.
With the supplied programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.
When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
The motor works very well, but it only runs on 2-3 S Li-PO . I tried using it on my nimh 6s accumulator and if I tried to full throttle it, it just shut down, or it would run very slowly and a red led blinked.
Ideally, no.
Yes it will work with 3S however you will need to be extremely wary of motor temp. If I was running 3s I would want to run 60 or 80amp esc not a 45amp
Answered by: Ben @ Wheelspin Models
Yes, this would fit your Carnage, however it's a touch high on KV for a model of that weight. We'd recommend a lower KV motor and/or checking your gearing is appropriate to avoid overheating.
Answered by: Ben @ Wheelspin Models
ET0416 would be OK as a basic system.
For something better take a look at say HW38010200 or P-CC010-0123-02
Answered by: Ben @ Wheelspin Models
Yes that would fit a TT-02
Answered by: Ben @ Wheelspin Models
I'd look at the 60A in that
Answered by: Ben @ Wheelspin Models
This requires bullets and power connector soldering on.
Answered by: Steve W @ Wheelspin Models
Yes that will be fine.
Answered by: Steve @ Wheelspin Models