Novan Ballistic Crawler Brushless Motor - 18.5T

Novak’s next-generation Ballistic motors have entered thecrawling field. The high-performance Ballistic Crawler Brushless Motors – 18.5T (#3618) and 21.5T (#3619) are expected to be two of the most sought after brushless crawling motors on the market. Because of their extreme versatility, theBallistic Crawler Motors can tackle all crawling conditions with a simple stator switch. Because the crawler-specific hardware is located outside of the hand-wound stators, drivers can replace the stators at any time to properly combat any type of terrain or course.

HIGH-END CRAWLER MOTOR
And like all Novak Ballistic motors, the Ballistic Crawlers contain heavy-duty solder tabs and a removable nine-inch shielded sensor harness. And by taking advantage of the Ballistics’ interchangeable wound stator construction, crawlers can simply replace the installed 18.5 or 21.5-turn stator for any available stator between 13.5 and 21.5 turns. The motors are also equipped with a custom-silicone gasket seal to keep dirt and debris from damaging the motors’ sensor plug. The Ballistic Crawler motors also include a Crawling Sintered Tuning Rotor - 14mm (#5950). The rotor’s large diameter and exclusive magnetic material provide the motors with more torque and stronger braking. It also increases natural drag braking and improves the motors’ initial throttle response, providing more control on steep climbs and downhill descents.

BALLISTIC CRAWLER BRUSHLESS MOTOR FEATURES
Sensor-based for excellent braking and low-speed driveability
Oversized front motor bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Completely rebuildable motor design
Nickel-plated Crawling Sintered Tuning Rotor -- 14mm (#5950) with 0.125” pinion shaft that accepts all existing pinion gears included with Ballistic Crawler motors.
Meets RoHS compliance and includes 120-Day Warranty
Designed and assembled by Novak in Irvine, Calif., using globally-sourced components
 
BALLISTIC CRAWLER BRUSHLESS MOTOR SPECS
Design: Sensor-based
Motor Size: 2.07” x 1.41” (52.6 x 35.8mm)
Motor Weight: 6.6oz. (187.0g)
Kv: 1,650 (#3618); 1,350 RPM/VOLT (#3619)
Watts: 119 (#3618); 85 (#3619)
Sensor Harness: 9” (230mm)