ST Model DG1000 EP RTF 2.4Ghz

by ST Models

Normally: £199.99

Web Price: £172.99

Seen it cheaper?
Let us price match!
Price Match Request
Name:
E-Mail:
Phone:
Competitor
Price:
Competitor
Web Link:

Note: Price matches will only be considered against valid, in stock products in the UK. Although we can match 99% of prices, some exceptions will apply. Full Terms
Looking to purchase instore?
Print a price voucher here
Please enter your e-mail address:

Part Number: A-STM030A
Stock Status: Out Of Stock What's this Mean?
Notify Me When In Stock
We'll email you as soon as this item is available:
If you fancy something that is truely unique and stylish then the ST Models DG1000 could be the model for you.

Based on the classic DG1000 glider, this gorgeous model is accurately moulded in impact resistant EPO foam, even those sexy wing tips! The wings are removable for easy transport by just releasing one screw and are re-inforced with carbon tube to ensure rigidity and strength. The aileron servos are pre-installed, as are the servo extension leads and each aileron hinge is formed by the EPO foam for best efficiency.

The fuselage is also moulded in EPO foam with carbon fibre re-inforcement and the elevator and rudder pushrods pre-installed and connected to their respective servos. Just bolt on the tail and the assembly is done!

Now we come to the clever bit! Not only do you get a powerful, 1500kv, outrunner brushless motor, propeller and ESC as standard, you get a unique motor retraction system to fold it away into the fuselage. That system is servo driven and cleverly controlled by a special mixer unit (supplied). Closing the throttle stops the propeller and motor before fully retracting and closing the doors. This all operates from the throttle stick alone. Just nudge the throttle open again and the motor swings up before operating. If you use the optional switched channel, you can opt top keep the motor out and just control the throttle as normal. When the motor is away, the model becomes highly efficient and will stay aloft in minimal lift conditions.

The supplied 2.4gHz AFHSS 5-channel radio assures you of glitch free performance.

Just fit a 3S 1300mah Li-Po battery of your choice and you're ready to go. The power is sufficient for a pretty rapid ascent and you will get many climbs from one charge.

From opening the box to going flying will take less than one hour!

Specification
Wingspan: 2010mm (79.1in)
Length: 970mm (38.2mm)
Servos: 4 x Micro, 1 x Std.Hi-Tq (all included)
Radio System: ST 2.4GHz Tx & Rx (Included)
Electric Motor: Brushless Outrunner (included) 1500kv
Wing Loading: 36.2 g/dm2
Wing Area: 27.6dm2 (427.8Sq.in)
LiPo: 3S 1330mah 13C Impulse required
S/C Rec: Brushless 18A (included)
 
A-STM030A ST Model DG1000 EP RTF 2.4Ghz
Part No.PowerFlying StyleAssembly Level
A-STM030A
Electric
Gliders
RTF (Ready to Fly)

This item is Listed in the following categories:

When a choice of colours is offered for a product, we will endeavor to fulfill your first request, but regret that this is not always possible and colours may vary on these items. Images are for illustration purposes only and whilst provided in good faith, may be incorrect. Prices quoted are valid for online purchases only and may be lower than those advertised in-store. E&OE. Currency conversions are given as an approximation only. All transactions will be processed in GBP. We advise you to research all part numbers before ordering to ensure compatibility with your model.