LB6 Professional LiPo Balance / NiCd / NiMH Charger And Discharger - 12v Input

This 12v powered charger from ProLux is ideal for charging all your R/C related gear!

Specifications:

Input : DC 11-18V
Battery Type : Ni-Cd / Ni-MH / Li-Po / LiFePo / Pb
Battery Cell :
                 Ni-Cd / Ni-MH : 1-14 Cell packs (1.2-16.8V)
                 Li-Po : 1-6 Cell packs (3.7 -22.2V)
                 LiFePo : 1-6 Cell packs (3.2-19.2V)
                 Pb : 2V, 6V, 12V
Charge Rate : 0.1A - 5.0A (0.1A Per gradation)
Discharge Rate : 0.1A - 2.0A (0.1A Per gradation)
Charging Capacity : 1- 9900mAH
Safety Timer : 10 - 720 mins or OFF
Trickle Charge Rate : 0.05 - 0.2A or OFF
Peak Sensitivity (- delta V) : 0 - 15mV

Features:

1. Super function 5 in 1,16-bit microchip CPU controller.
2. Built-in system temperature detection protection with additional battery temperature sensor option ( extra option item no.2714)
3. DC input only and could set low voltage 11V.Under 11 V, it will stop working.
4. Built-in Li-Po / LiFePo balance charging with requested connectors
5. Automatic accidental battery inversion detection and reverse input protection.
6. Memory function for charging and discharging parameters.
7. All-aluminum streamline casing design-tough, compact and portable.
8. Large Two-line, 16 characters dot matrix LCD display.
9. Banana plug, it\'s very convenient for using.
10. 10 tone selectable beep function with volume control.
11. Built-in DC cooling fan.