FEATURES
ESC (NOVM1835);
Additional motor wire to connect a 10.5 turn or higher brushless
motor for use with 2S LiPo packs
May be used for brushless class racing, crawling (when used with a
Novak crawling brushless motor), or bashing around
Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries (2S only
with brushless motor)
Heavy duty 2-amp BEC
Three throttle modes;
Rock Crawl Mode with adjustable drag brake power
Standard/Basher Mode for normal FWD/BRK
Robotic or Servo Mode for FWD/REV operation only
Four adjustable parameters;
Brake Power/Throttle Mode (5 settings)
Dead Band (5 settings)
Drive Frequency (5 settings)
Voltage Cut-Off
One-Touch programming interface with four multi-colored status LEDs
6V output for cooling fan or other options such as running lights
Temperature monitoring allows user to check ESC operating temperature
at any time
Thermal overload protection to prevent overheating
Water-resistant case with silicone gasket seal
One touch setup
RoHS compliant
One year limited warranty on both components through Novak beginning
at date of purchase
Motor:
Designed for crawler vehicles that require precise movement control
High number of turns for excellent torque and long run times
Rebuildable with easily accessible commutator and replaceable
brushes and springs
Stand-up brush design
High-strength ferrite magnet
Dual ball bearings
Direct solder wiring tabs for flexible soldering options
INCLUDES
Novak Eiger ESC with Gold Plated Bullet Motor Plugs, Mounting Tape,
Power Cap, Heat Sink, Rock Star 55 Turn Brushed Motor and
Instruction Manual
REQUIREMENTS
Pinion gear of modeler's choice
Installing in vehicle and connecting to battery and receiver
SPECIFICATIONS
ESC;
Input Cells: 2-3S LiPo or 4-9 NiMH
Size: 1.15 x 0.95 x 0.75" (29.0 x 24.3 x 20mm)
Weight: 0.75oz. (21.31g) without wires
On-Resistance: 0.0013 ohms
Motor Limit: 2S Brushed, 20T or higher, any 380 size
3S Brushed, 35T, any 380 size
2S Brushless, 10.5T or higher, any 380 size
BEC: 6V DC/2A
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Motor;
Motor Size: 2.07 x 1.42" (52.7 x 36.1mm)
Shaft Diameter: 0.125" (3.2mm) accepts all 1/8" pinion gears
Bearing: Standard 3/8" x 1/8"
Motor Weight: 5.97oz. (169g)
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.