Eiger ESC/Rock Star Crawling Mot

Brand: Novak H

Part Number: H-NOVM3234

£103.54 Web Price RRP £108.99

Shadow stock: Usually ships within 2 days

Request Price Match

This is the Novak Eiger 2S/3S Brushless and Brushed Electronic Speed Control
and the Rockstar 45 Turn Brushed Motor for Crawling Applications.


ESC (NOVM1835);
Additional motor wire to connect a 10.5 turn or higher brushless
motor for use with 2S LiPo packs
May be used for brushless class racing, crawling (when used with a
Novak crawling brushless motor), or bashing around
Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries (2S only
with brushless motor)
Heavy duty 2-amp BEC
Three throttle modes;
Rock Crawl Mode with adjustable drag brake power
Standard/Basher Mode for normal FWD/BRK
Robotic or Servo Mode for FWD/REV operation only
Four adjustable parameters;
Brake Power/Throttle Mode (5 settings)
Dead Band (5 settings)
Drive Frequency (5 settings)
Voltage Cut-Off
One-Touch programming interface with four multi-colored status LEDs
6V output for cooling fan or other options such as running lights
Temperature monitoring allows user to check ESC operating temperature
at any time
Thermal overload protection to prevent overheating
Water-resistant case with silicone gasket seal
One touch setup
RoHS compliant

Motor (NOVC3547);
Designed for crawler vehicles that require precise movement control
High number of turns for excellent torque and long run times
Rebuildable with easily accessible commutator and replaceable
brushes and springs
Stand-up brush design
High-strength ferrite magnet
Dual ball bearings
Direct solder wiring tabs for flexible soldering options


Novak Eiger ESC with Gold Plated Bullet Motor Plugs, Mounting Tape,
Power Cap, Heat Sink, Rock Star 45 Turn Brushed Motor and
Instruction Manual


Pinion gear of modeler's choice
Installing in vehicle and connecting to battery and receiver


Input Cells: 2-3S LiPo or 4-9 NiMH
Size: 1.15 x 0.95 x 0.75" (29.0 x 24.3 x 20mm)
Weight: 0.75oz. (21.31g) without wires
On-Resistance: 0.0013 ohms
Motor Limit: 2S Brushed, 20T or higher, any 380 size
3S Brushed, 35T, any 380 size
2S Brushless, 10.5T or higher, any 380 size
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Motor Size: 2.07 x 1.42" (52.7 x 36.1mm)
Shaft Diameter: 0.125" (3.2mm) accepts all 1/8" pinion gears
Bearing: Standard 3/8" x 1/8"
Motor Weight: 5.97oz. (169g)

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No reviews yet!

Write a Review
No questions yet, why not ask one?
Ask a Question