Impact/Vulcan Mod 7.5T Race Comb

This is the Novak Impact Racing Electronic Speed Control
with the 7.5 Turn Vulcan Mod Sensor Based Brushless Motor.

FEATURES

Impact ESC (NOVC1730);
Meets ROAR Sportsman Class Racing specs
Ideal for all 1/10 scale 2WD on and off-road racing, 1/12 scale
racing, and popular 1S and 2S LiPo classes
Auto-detect LiPo battery protection circuitry reduces power as needed
to protect batteries from going below the safety voltage
Novak Super Tuner with multiple on-board adjustable settings
including;
Drive Tuning: Dynamic Timing Advance, RPM (Start/Final/Range)
Drive Frequency, and Minimum Drive
Brake Tuning: Brake Frequency, Drag Brake, and Minimum Brake
Additional Tuning: Deadband, Reverse Disable, and LiPo Protection
(On/Off)
NovaBrakes for instant braking under any condition
Novak X-Drive for enhanced throttle response, smooth power delivery,
higher top speeds, and cooler operating temperatures
Cooling fan with plug-in harness
Sensor based for excellent torque and low-speed drivability
On-board diagnostic temperature monitoring
Thermal overload protection circuitry
Water resistant case with protective silicone gasket
Gold-plated, direct-solder wiring tabs
On-board Hall Sensor Test verifies that motor's sensors are
working properly

Motor (NOVC3657);
ROAR approved pro modified racing motor with a high RPM stator
hand wound with Novak's American Red Wire
Recommended for 2WD Buggy, Truck, SC Truck , 4WD Buggy, 1/10 & 1/12
scale Pan Cars, Formula 1, Dirt Oval, Road Ovel, Spec Racing,
Touring and Drift Car, and Rock Crawling
Adjustable timing
One-piece front can with large vents for proper bearing alignment
and maximum airflow
Rebuildable design with replaceable sensor harness, rotor, sensor
board, hand-wound stator, sleeve, end bells, ball bearings and
hardware
Removable shielded sensor harness plugs into a sealed gasket to keep
dirt from damaging sensor plug
Oversized front bearing for increased load handling
Nickel-plated, sintered Neodymium rotor with 0.125" pinion that
accepts all existing pinion gears

INCLUDES

Novak Impact Brushless ESC with Heat Sink, 14GA Power Wires, Glitch
Buster, Cooling Fan, Double-Sided Mounting Tape and Instructions
Novak 7.5 Turn Vulcan Mod Brushless Motor with Sensor Wire

SPECIFICATIONS

Impact ESC;
Input Cells: 1-2S LiPo / 4-6-cell NiMH (1S Booster Module (NOVC5477)
recommended if using 1S LiPo Battery)
Size: 1.15 x 0.95 x 0.79" (29 x 24.3 x 20mm)
Weight: 0.75oz (21.3g)
On-Resistance: 0.0004 ohms @ 25