HOBBYWING EZRUNSL 4274 2200KV G2 MOTOR - BLACK
The 4 pole design of the EzRun 4274 will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain.
Hobbywing’s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90% meaning that if the energy consumption of the motor is at 1000 watts your guaranteed that 900 watt of that power will be available and no less
The motor housing is made from hard anodized aluminum, motor windings are wound from pure oxygen-free double insulated copper wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets, output shaft from high quality polished alloy steel and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn will guarantee strength, outstanding performance, high durability and smoothness of the motor.
This motor can also provide a powerful upgrade solution for all popular 1/8th scale monster trucks such as TRAXXAS E-REVO, E-MAXX, HPI SAVAGE, and THUNDER TIGER E-MAT plus other trucks and buggies.
HobbyWing EzRun 4274SL G2 Features:
Spec Check:
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
Yes, this is a 1:8 scale motor.
Yes, it should run fine on a good brand 120A ESC on 4S. As always, please check your motor and ESC temperatures during the initial runs to check gearing for overheating, etc.
Answered by: Ben @ Wheelspin Models
Yes, it will fit those models.
Answered by: Ben @ Wheelspin Models
From memory, they come with an 8mm plug, that goes straight into a hobby wing esc
Answered by: Ben @ Wheelspin Models
Yes that should fit
Answered by: Ben @ Wheelspin Models
It should be fine on the MAX10 120A version
Answered by: Ben @ Wheelspin Models
Yes
Answered by: Ben @ Wheelspin Models
That should run OK
Answered by: Ben @ Wheelspin Models
No sorry it's too large I believe
Answered by: Ben @ Wheelspin Models
I've not tried it I'm afraid. I think this may be a bit small for the X-MAXX however
Answered by: Ben @ Wheelspin Models
Yes it should fit a Vorza
Answered by: Ben @ Wheelspin Models
The 2200kv is the one for 6S.
Answered by: Ben @ Wheelspin Models
You'd normally run these on a MAX8, so a MAX6 will have plenty of capacity to run this yes.
Answered by: Ben @ Wheelspin Models
The smaller holes are m3 and the larger holes are m4 .
Answered by: Steve W @ Wheelspin Models
The "c" rating of the battery will not affect temp etc. The higher the C rating the better the battery.
Answered by: Si @ Wheelspin Models