Absima AB1 Brushed

Brand: Absima

Part Number: AB-12201

£109.00 Web Price RRP £119.95

In stock: Usually ships same day

Request Price Match

Looking for a step up from the basic package? Why not take a larger capacity battery coupled with a fast charger.

1 x Wheelspin Racing 7.2v Stick Pack - 3300mAh - Tamiya Connector #WM-3300T
1 x Fusion NX86 AC/DC NiMH Charger #O-FS-NX86

saving you £17.44 over RRP!

Want longer run time and a super quick charge - look no further than this combo package, supplied with TWO of our best batteries!

2 x Voltz 5300mAh NiMh Stick Pack - 7.2v #VZ0025
1 x Fusion NX86 AC/DC NiMH Charger #O-FS-NX86

saving you £20.45 over RRP!

Show Spares and Option Parts

Absima presents their new 4WD 1:10 Buggy range. With the AB1 you finally get what you want; a high quality and robust model sport beginners Buggy in 1:10 scale. A waterproof 40A ESC and a 15 turns brushed motor bring the buggy into high gear. Together with the included NiMH racing pack battery and the charger, we make an all inclusive package. 

Immediately striking is the extremely robust construction of the AT1 chassis. The upper deck (Chassis stiffening middle), as well as the shock towers front and rear, are made ​​of aluminum. All plastic parts are made extra strong and have the necessary flex. The reliable 4WD drivetrain is well prepared for difficult ground and the whole model is equipped with ball bearings.
Both the ESC and steering servo are water resistant and the recevier sits in a sealed water proof receiver box.

Please use only 2S (2 cells; 7.4V) LiPo batteries with a C-rate of 30C or lower. If you use a LiPo with higher C-rate, the motor could be damaged. NiMH (max. 7.2C; 6 cells) batteries could be used any type without exception.

Absima AB1 Brushed Features:

  • Complete built
  • Ball bearing transmission
  • Adjustable oil shocks
  • CVD steel shafts
  • Powerfull 550 15T motor with heat sink
  • Waterresistant speed controller
  • Waterresistant steering servo
  • Gear differentials front & rear
  • Aluminum engine mount
  • Complete covered transmission
  • CVD steel shafts on front axle
  • Complete adjustable turnbuckles
  • Aluminum upper deck
  • Aluminum brace mount front & rear
  • Servo saver
  • Printed body
  • Charger and NiMH Racing Pack included 

Absima AB1 Brushed Technical specifications:

  • Length: 430mm
  • Width: 270mm
  • Height: 140mm
  • Weight: 1580g
  • Wheelbase: 293mm
  • Chassis clearance: 25mm
  • Speed: +40 KM/H
  • Brand: Absima
  • Part No: AB-12201
  • Scale: 1:10
  • Build Level: Assembled (RTR)
  • Vehicle Type: Buggy
  • Power Source: Electric - Brushed
  • Surface Type: Off Road

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No reviews yet!

Write a Review
No questions yet, why not ask one?
Ask a Question