Top Flite Giant P-47D Thunderbolt Gas ARF 2.6-4.0,85

This is the radio controlled, gasoline powered, almost ready-to-fly P47D Thunderbolt Giant Scale Sport Airplane from Top Flite. For intermediate to advanced modeler/flyers with moderate low-wing experience. IMAA Legal

FEATURES: Construction: Plywood and built-up balsa sheeting
Wings: One-piece with wing joiner
Covering: Top Flite MonoKote
Cowl: Painted fiberglass
Landing Gear: Heavy duty fixed prebent wire
Wheels: Foam, two main and one tailwheel
Flap Control: Dual servo
Aileron Control: Dual servo
Cockpit: Plastic kit molded in white with instrument panel, left and
right control panels, seat, floor and control stick
Radial Engine Replica: Molded plastic
Engine Mount: Plywood firewall
Stabilizer: Aluminum tubes automatically align stab halves and reduce
workshop time
Building Time: Ready to fly in 15-20 hours
Spinner Hub: Two-piece aluminum
Hardware: Full set, IMAA legal
Warranty: Top Flite Models guarantees this kit free from defects
in material and workmanship at the date of purchase. Warranty
does not cover any component parts damaged by use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, decals,
landing gear, wheels, hardware, spinner hub, hardware package
fuel tank, replica radial engine, cockpit kit and photo-illustrated
instructions

REQUIRES: Radio: 5 - 7 channel
Servos: 50 oz-in torque, 2 each for elevators, ailerons and flaps,
1 each rudder and throttle
Micro, 1 if retracts are installed
1 standard servo for optional choke
Four 6" (152mm) Servo Extensions: Throttle, optional choke, ailerons
and flaps
One 24" (609mm) Servo Extension: Ailerons
Four 6" (152mm) Y-Harness: Elevator, rudder/steering, ailerons and
flaps
Engine: 2.6 - 4.0 cu in (43 - 65cc) gasoline powered
Building and Field Equipment: Tools, propeller, fuel filter, foam
rubber padding

SPECS: Wingspan: 85" (2160mm) Wing Area: 1329 in² (85.7 dm²) Weight: 19.5-21.5 lb (8.84-9.75 kg) Wing Loading: 34-37 oz/in² (104-113 g/dm²) Length: 75" (1905mm) Center of Gravity: 6-3/8" (162mm) back from the leading edge of the wing at the fuselage Control Throws- Low Rate High Rate Elevator: Up & Down 1/2" (12.7mm) 8° 3/4" (19.1mm) 12° Rudder: Right to Left 1-3/8" (35mm) 16° 1-7/8 (47mm) 22° Ailerons: Up & Down 1/2" (12.7mm) 10° 3/4" (19.1mm) 15° Flaps: 2-3/8" (60mm) 34° down

COMMENTS: For optional retract landing gear, the following Robart components are recommended: ROBQ2305 Robart #157VRX Large-Scale Deluxe Air Control Kit ROBQ2369 Robart #169 10' (254mm) Red & Purple Pressure Tubing ROBQ1636 Robart Main Gear ROBQ2225 Robart Tail Gear ROBQ2395 Robart #190 Air Line Quick Disconnects

Following are the Top Flite MonoKote colors used on this model and order numbers for 6' rolls; Aluminum TOPQ0205 Black TOPQ0208 Orange TOPQ0202 Sapphire Blue TOPQ0226 White TOPQ0204 Missile Red TOPQ0201