For electric on and off road cars, buggies and trucks
Hard plastic case for protection against the elements and crash
4mm female bullet connectors for positive (+) and negative (-)
2mm balance connector located on jumper wire
Male connectors to solder to wire leads
2S 7.4V 80C 6000mAh Saddle Pack LiPo Battery
Two 4mm Male Bullet Connectors
One Jumper Wire with 2mm Female Bullet Balance Connector
LiPo compatible charger such as the Duratrax Onyx 235, (DTXP4235) or
the TrakPower VR-1 (TKPP5000)
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V (each module is 3.7V)
Max Recommended Charge Current: 1C (6A)
Continuous Discharge: 80C (480 amps)
Pack Dimensions: 0.9 x 1.8 x 2.7 in (25.1 x 47 x 69 mm)
Weight: 10.0oz (284g)
Discharge Connectors: 4mm Bullet
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
Royal mail at £3.50, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.