ETRONIX PHOTON 1/8 SYSTEM W/2Y 2150KV MOTOR/150A ESC
Two systems are available in the range 120A more suited to RTR applications and a 150A for higher end buggy/truck competitive demands. Also features a separate sensor cable port for use with sensored aftermarket motors.
Supplied with (ET0107) Etronix Photon SBS LED Programming Card
120A Specification :-
4 Pole sensorless or sensored brushless motor
2-6S Lipo Support
5-18S NiMH/NiCd
3A 6V/8.4V Adjustable BEC output
120A Constant current
760A Burst Current
150A Specification :-
4 Pole sensorless or sensored brushless motor
2-6S Lipo Support
5-18S NiMH/NiCd
3A 6V/8.4V Adjustable BEC output
150A Constant current
1080A Burst Current
Royal mail at £3.95, or Express at £6.95.
Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
This item is 150A as per title.
It is sensorless.
Answered by: Ben @ Wheelspin Models
There is no battery connection on these, so you can solder on whatever you need
Answered by: Ben @ Wheelspin Models
These have a 5mm diameter shaft
Answered by: Ben @ Wheelspin Models
The ESC measures up at 55x46x37mm (without fan)
Answered by: Ben @ Wheelspin Models
It should be OK on 6S according to the spec - but as with any ESC/Motor, it will depend on the weight and gearing of your vehicle.
Check motor and ESC temperatures whilst bedding in to ensure gearing is appropriate.
Answered by: Ben @ Wheelspin Models
Yes, that should work fine in an Arrma Limitless.
Answered by: Ben @ Wheelspin Models
Yes it would be a nice easy swap.
Answered by: Anthony @ Wheelspin Models
Yes that should work nicely in there
Answered by: Ben @ Wheelspin Models
Yes it would fit , yes 1x 4s battery would be fine.
Answered by: Anthony @ Wheelspin Models