Spektrum S9020 1:5 Scale Digital Servo

Brand: Spektrum

Part Number: SPMSS9020


SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.


Why not contact our team to see if an alternative is available?






 

No servo on the market has been able to fully live up to the expectations of today’s 1/5-scale community or the performance demands of vehicles like the Losi® 5IVE-T. Servo fade, weak holding power and the crowbar effect are just a few of the issues found with even the most expensive large scale surface servos, until today!

Paul Beard, the person who brought 2.4GHz to the world of RC has done it again. The new Spektrum™ S9020 servo represents a new era in large scale servos and completely changes how 1/5-scale vehicles perform.

The S9020 incorporates features not found in any servo on the market today. Starting with patent-pending Back EMF technology, drivers no longer have to be concerned with servo fade after just a few minutes of run time and inferior holding power. The S9020 HV servo maintains optimum performance levels throughout the entire run while providing speed and torque ratings that put it in the ranks of servos that cost twice as much.

Dynamic breaking technology assures the vehicle maintains the heading demanded thanks to the servos brute level of holding power. An improved integrator design virtually eliminates the crowbar effect while keeping the servo temps low through even the most grueling of runs. Using Back EMF technology, position lock exponentially improves the servos ability to keep its position while greatly increasing holding power. In addition, the S9020 offers virtually zero servo fade, no matter how much is thrown at them. Forget about doubling up on expensive and heavy dual servo mounts. The S9020 won’t fade under any condition.

Spektrum S9020 1:5 Scale Digital Servo Features:

  • Improved integrator design eliminates crowbar effect and reduces heat build-up
  • Socket-head cap screws
  • HV for use with 2-cell Li-Po’s
  • Waterproof
  • Steering and throttle options available
  • Removable, hi-strength servo lead
  • Low profile standard 1/5-scale size
  • Hardened steel gears
  • Dynamic breaking provides extreme precision
  • Zero-fade performance
  • Insane holding power
  • Proprietary & patent pending software provides unmatched performance & precision
  • Extreme performance level eliminates need for dual servo setups

Spektrum S9020 1:5 Scale Digital Servo Specfications:

  • Bearing: : Dual
  • Connector Type: : Z-Connector
  • Connector Wire Gauge: : 22 AWG
  • Connector Wire Length: : 7.87 in (200mm)
  • Current Draw Idle: : 16.8mA @ 6.0V; 17.2mA @ 8.4V
  • Current Draw Stall: : 4.9A @ 6.0V; 7A @ 8.4V
  • Gear Material: : Steel
  • Gear Type: : Metal
  • Height: : 1.87 in (47.50mm)
  • Input Voltage: : 6.0-8.4V
  • Length: : 2.5 in (63.3mm)
  • Servo Type: : Digital
  • Speed: : 0.20/60deg @ 8.4V; 0.23/60deg @ 7.4V; 0.28/60deg @ 6.0V, at no load
  • Spline Count: : 15 Teeth
  • Torque: : 1050 oz-in (75.6kg-cm) @ 8.4V, 910 oz-in (65.5kg-cm) @ 7.4V, 736 oz-in (53kg-cm ) @ 6.0V
  • Weight: : 5.0 oz (142g)
  • Width: : 1.20 in (30mm)
  • Brand: Spektrum
  • Part No: SPMSS9020
  • Barcode: 605482016237
  • Max Voltage: 7.4v
  • Gear Material: Metal
  • Fitment: Option Part

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

can i use my standard 6v rechargable battery in my baja 5b with this servo? or do i have to use lipo battery?
Asked by Eron on 6th January 2017
You can run a 6v NiMh if you wish. But a 2S LiPo will give better performance.

Answered by: Ben @ Wheelspin Models

Is this just a straight swap for the standard Losi 5ive servo?
Asked by Matt Leach on 17th January 2017

Yes these will fit the Losi 5IVE

Answered by: Ben @ Wheelspin Models

What's the length in mm between the center of the holes? Thanks
Asked by Felix Raithel on 24th January 2017

We don't have the exact dimension, however width is 30mm, so we'd estimate this to be around 20mm

Answered by: Ben @ Wheelspin Models

hi. can I buy a spare removable lead for this servo
Asked by James on 20th September 2019

Yes it looks like Spektrum list them (eg SPMSP3031) - but they are not listed in the UK at time of writing sorry!

Answered by: Ben @ Wheelspin Models

Ask a Question Write a Review