MC-20 UK Graupner HoTT

Hand-held and tray-type transmitter:

The mc-20 HoTT with 12 control functions and a new internal patch aerial enables advanced RC model builders to control nearly any model. The use of the Graupner HoTT 2.4 GHz transmission technology ensures high functional reliability through bidirectional communication between sender and receiver, with integrated telemetry, voice output via speaker or headphone output, and ultra-fast controller response times.
The transmitter has a 24-model memory. Programming is done through simplified programming technology with capacitative touch keys. Two high-contrast, 8-line blue-lit graphical displays ensure a perfect display of all parameter settings and telemetry data. It is possible to store telemetry data and expand the model memories on a micro-SD memory card.
USB connector for readout and storage of model memories and for firmware upgrades.

• Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
• Patch aerial
• Bidirectional communication between transmitter and receiver
• Wireless L/S function
• 6 different languages (German, English, French, Italian, Spanish, and Dutch) possible via software update. For availability of the respective language, see Download area
• Storage of telemetry data with date and time
• Servo cycle times of 10 ms can be selected for digital servos.
• Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor.
• Operation and programming based on the proven concepts of the mx-24
• A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage.
• 12 control functions
• Free assignment of all switches
• 24 model memories«
• 10 switches/keys , including 2 3-stage-switches long, 4 2-stage-switches, 2 switches long, 2 switches on the back and 2 sliders and 2 rotary controls on the side
• Mode 1 to 4 freely selectable
• CAP-TOUCH key with key lock function to prevent unintentional operation
• Numerous telemetry, programming, and analysis functions right in the transmitter display
• Voice output can be called up via freely programmable switches
• Extensive programmes for fixed-wing and helicopter models
• Swashplate limiter
• Switch »Monitor« to control all switches and control switches
• 12 mixers freely programmable for fixed-wing models and helicopters with freely selectable input and output functions, including 4 curve mixers with the new 5-point-curve technology in 1% steps, curve values are simple to set and adjust for a maximum of 5 points for throttle, pitch, tail rotor, or other nonlinear setting paths. The processor in the CPU uses a sophisticated polynomial approximation method to calculate an ideal, correctly rounded MPC (multi-point curve) mixer curve.
• 7 flight phase programs can be adjusted individually for each model and assigned names; the switching time can be set separately.
• SUPER-SERVO menu with a perfect overview of all servo setting data and simple correction of parameters for 4 levels (turning direction, centre position, bilaterally separate servo paths, and bilaterally separate travel limit for 12 servos with a total of 72 setting options)
• SUPER-DUAL-RATE, EXPO, and EXPO/DUAL-RATE menu with 36 possible setting variants, for 3 servo functions and 6 flight phases.
• Practical, optimised multi-function menus for fixed-wing and helicopter models. Entering the number of aileron and cambered flap servos automatically programs all the required mixer functions in the multifunction fixed-wing menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function, and additional special functions
• Helicopter swashplate mixer for 1, 2, 3, or 4-point linkage.
• Failsafe monitor for 12 servo functions
• Convenient timer menu. Stopwatch system, alarm timer, countdown timer, lap counter, et cetera. 2 times and 1 lap time can be displayed.
• Stopwatch with history: In addition to the lap counter, there is a Time 1, which records the power-on times and a Time 2, which records the switched-on and switched-off times separately.
• Transmitter operating time timer is automatically set to zero by the transmitter battery charging process.
• Switch assignment of the flight phase switches: Now 6 switches, including 2 with priority function. The name of each switch combination can be selected freely. The number of flight phases thus does not depend on the number of flight phase switches.
• Linearization of swashplate servos: Electronic compensation for the nonlinear travel of swashplate rotary servos.
• Tailplane type normal, V-tail, Delta/flying wing. 2 elevator servos 3+8 (as a result 2 linkable elevator servos are immediately available without wasting free mixers/dual-mixers)
• Number of flaps 4 ailerons / 4 cambered flaps: Full support for 8 control surface servos, now without wasting free mixers.
• Switch-off capability for flight phase transition delay: For individual channels, the delay time can be switched on a flight phase basis (e. g. for motor-off for electric models or for head lock activation/deactivation for helicopters)
• 16 Phase names:
• Fixed-wing mixer: Newly designed multi-flap menu for ultra-simple, easy-to-understand setup of up to 8 control surface servos on a flight-phase-specific basis - without the use of free mixers.
• Number of flight phases: (fixed-wing: 7, heli: 6 + AR)
• Phase trim
• Switchable Snap-Flap Mixer elevator servo -> cambered flaps with new offset function for easy short corrections and fast turns
• 3 Ring limiter for Voith-Schneider and similar drives
• Channel sequencer for 3 channels for folding motors and landing gear doors
• Logical switches
• Trim memory
• Multi-channel functions for channel expansion for up to 14 additional channels
• Music player and internal speaker for voice output and music
• Servo assignment swap at the receiver output of the transmitter and receiver
• PPM signal can be set at data output
• Model memories of the mx-20 can also be loaded directly into the mc-20. To do so, simply copy the model memories on the PC to the appropriate directory. Then the switches and controls must be newly assigned because of the different hardware.

The set contains:

Graupner HoTT mc-20 microcomputer transmitter with built-in LiPo 6000 mAh transmitter battery, Graupner HoTT GR-24 receiver, GR-12L receiver, 500 mA transmitter charger, update cable, µSD card, aluminium case, hand rests, neck strap, short and long joystick, transmitter strap (strap: 55% polyester, 45% acrylic, neck pad 65% polyester, 35% acrylic)

General HoTT features:

• Simple, extremely fast binding
• Range test and warning function
• Low-voltage warning
• Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
• Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with internal telemetry
• Binding of any number of receivers for channel expansion (max. of 32 channels)
• Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
• Maximum immunity to interference through optimised frequency hopping and broad channel spread
• Intelligent data transmission with correction function
• Extremely fast rebinding, even at maximum distance
• Telemetry analysis in real time
• Over 200 systems can be used simultaneously
• Future-proof through update capability via USB interface or MicroSD card

NEW:

Reliability:

FHSS, frequency hopping via up to 75 channels

Maximum immunity to interference through optimised frequency hopping and aerial diversification

Intelligent data transmission with correction function

Extremely high range

Range test and warning function

Low-voltage warning

Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)

Numerous failsafe functions

Key-lock function to plrevent unintentional changes to menus


Precision:

Shorter response times can be set (10ms periods adjustable)

No additional delays due to module processors. The entire hopping management is done directly by the 32-bit main processor.

Synchronous servo travel due to simultaneous control of the servo outputs is possible in blocks of 4


Pilot feeling:

Extensively delay-free control reactions due to direct processing

Telemetry analysis in real time

Speech output of the timers, telemetry data, and warnings via headphone output

Repeat function and continue function for voice output can be programmed via freely assignable switches

Pre-selection of voice output to be used

Separately adjustable volume for beeps and voice output

Integrated telemetry display with 8 x 21 characters or 128 x 64 pixels, optionally in test or graphic form

Duration of display illumination: ALWAYS, 30s,.60s, 90s, 120s

Micro-SD card slot for storage of telemetry data, similar to a black box and to add model memories, MP3 player, and for firmware updates

PC software for analysis or display of the telemetry data via download

Buzzer signal programmable at the highest receiver output for L/S function, satellite receiver, simulators, flybarless stabilisation systems, et cetera

Model-memory-dependent binding, except for copied model memories

Wireless teacher/pupil function

Numerous flight phases programmable

Swashplate limiter

Motor off function

Numerous fixed-wing model and helicopter mixers


Other characteristics:

Simple, extremely fast binding

Free channel allocation (channel mapping), transmitter and receiver mixing functions, as well as all servo settings can be programmed simply

Binding of any number of receivers for channel expansion (maximum of 16 channels) The last receiver bound sends the telemetry data.

Future-proof thanks to the update capability via USB interface or MicroSD-card

Specification