E Flite PA-20 Pacer ARF

Brand: E Flite

Part Number: EFL2790

£132.29 Web Price RRP £146.99

In stock: Usually ships same day

Request Price Match

Show Spares and Option Parts

The PA-20 Pacer was Piper’s answer to the four-seat family airplanes offered by Cessna and Stinson who were capitalizing on the post-war general aviation boom. Eager veterans used their G.I. bill to earn pilot certificates and needed a “family car of the air” for travel that the venerable J-3 Cub used in training simply could not accommodate. The E-flite® PA-20 Pacer 10e ARF airplane replicates the full-scale Pacer for RC pilots who want an iconic scale experience great for hopping out of small fields. Not only does its outline and color scheme closely honor the original, you also get high-end interior appointments, scale looking landing gear, plus optional flaps for greater control at a wider range of speeds. Even more satisfying is the short amount of time you’ll need for this classy lady to be flight-ready.

From the authenticity of its traditional construction to the richness of its UltraCote® finish and high-gloss fiberglass cowling, the E-flite PA-20 Pacer 10e ARF delivers a scale model with outstanding flight characteristics so that you can look like a class-act both in the air and on the ground. The recommended E-flite power system was designed around popular and economical 3S Li-Po batteries to provide great performance for scale maneuvers as well as picture perfect touch-n-gos.

E Flite PA-20 Pacer ARF Features:

  • Classic lines and highly accurate scale proportions
  • Laser-cut balsa and plywood construction
  • Genuine Hangar 9® UltraCote® covering
  • Ready-to-mount the E-flite® Power 10 brushless motor
  • Pre-painted fiberglass cowl and wheel pants
  • Scale cockpit detail (pilot not included)
  • Four-channel control with optional flaps
  • Two-piece, plug-in wing with carbon fiber wing tube
  • Scale wire landing gear assembly
  • Large, easy-access belly hatch

E Flite PA-20 Pacer ARF Specifications:

  • CG (Center of Gravity): 2-3/16 to 2-3/4 in (55-70mm) back from the leading edge of wing
  • Control Throw (Ailerons): Low: 11/32 in (9mm) up, 9/32 in (7mm) down, 15% expo; High: 15/32 in (12mm) up, 11/32 in (9mm) down, 25% expo
  • Control Throw (Elevator): Low: 1/2 in (13mm) up/down, 20% expo; High: 25/32 in (20mm) up/down, 30% expo
  • Control Throw (Flaps): 50-deg maximum travel
  • Control Throw (Rudder): Low: 1 in (25mm) right/left, 15% expo; High: 1 in (25mm) right/left, 15% expo
  • Experience Level: Intermediate
  • Flaps: Optional
  • Flying Weight: 46.4-48.0 oz (1300-1360 g)
  • Fuel Type: Electric
  • Is Assembly Required: Yes
  • Main Wing Tube Length: 395mm
  • Main Wing Tube OD: 9mm
  • Motor Size: 10-size brushless outrunner
  • Overall Length: 36.3 in (920mm)
  • Plane Type: Scale Civilian
  • Power Plant Size: 10-15 Electric
  • Prop Size: 10 x 5 - 12 x 6 thin electric propeller
  • Radio: 4+ channel radio system
  • Recommended Environment: Outdoor
  • Recommended Motor Battery: 11.1V 3S 1800-2200mAh LiPo
  • Retracts: No
  • Servos: (4) digital sub-micro servos required, (6) required for flap operation
  • Speed Control: 40-amp brushless
  • Spinner Size: 1-3/4 in (45mm)
  • Trim Scheme Colors: UltraCote True Red (U866), Black (U874)
  • Wing Area: 451 sq. in. (29.1 sq. dm.)
  • Wingspan: 51.0 in (1300mm)

Needed To Complete

  • 4+ channel transmitter
  • 4+ channel receiver
  • (4) sub-micro servos, plus (2) sub-micro servos for optional flap operation
  • 10-size brushless outrunner motor
  • 40-amp brushless ESC
  • Propeller
  • Standard propeller hub or up to a 1.75-inch spinner
  • Flight battery
  • Charger for flight battery
  • Brand: E Flite
  • Part No: EFL2790
  • Assembly Level: ARTF (Almost RTF)
  • Power: Electric
  • Flying Style: Scale

Free UK Delivery!

This item is over £100, so qualifies for free standard UK shipping!

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No reviews yet!

Write a Review
Whats required to put this model kit in the air?
Asked by Tony on 21st August 2016

Needed To Complete:

- 4+ channel transmitter
- 4+ channel receiver
- (4) sub-micro servos, plus (2) sub-micro servos for optional flap operation
- 10-size brushless outrunner motor
- 40-amp brushless ESC
- Propeller
- Standard propeller hub or up to a 1.75-inch spinner
- Flight battery
- Charger for flight battery

Answered by: Ben @ Wheelspin Models

Ask a Question