SAVOX WATERPROOF DIGITAL SERVO 20KG/0.15s@6V 32KG/[email protected]
The SW1210SG is the premier waterproof digital servo in the Savox Lineup. This coreless servo boasts 277.7 oz-in of torque and a speed of .15 at 6.0V and is now High Voltage capable with an impressive 444.4 oz-in of torque and a speed of .13 at 7.4V.
It combines leading edge technology with super high 12-bit (4096) resolution and steel gears for one versatile and waterproof servo! This is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.
Savox SW-1210SG Servo Features:
- High voltage capable
- Combines leading edge technology with super high 12 bit (4096) resolution and steel gears.
- Waterproof.
- Coreless motor provides high speed, incredible efficiency, and low power consumption.
- Extremely strong steel gears ensure long-life and durability.
- The aluminum case design not only looks good but also allows for cooler and smoother operating temps.
- Our servos are totally green – from materials to production, these servos are environmentally friendly.
- Ideal for RC cars, trucks, buggies, and boats.
Spec Check:
- Dimensions(mm): 40.6x20.7x42.0
- Weight(g): 71
- Speed(@6V sec/60): .15
- Torque(@6V oz-in): 277.7
- Speed(@7.4V sec/60): .13
- Torque(@7.4V oz-in): 444.4
- Gear: Unique Steel
- Bearing: 2BB
- Case: Aluminum
- 25 Tooth Spline
Unsure which servo you need for your model?
Visit our Savox Servo Soultion Centre and find the ideal servo for your needs.
Hi Chaps, Im looking to upgrade steering and throttle servos on a HPI Baja 5b to something decent. i have the spectrum 2410?? receiver..the AVC one
I like the look of the Savox range, but looks can be deceiving. Can u recommend a couple of digital replacements. Thanks very much. Dave
Asked by Dave on 22nd August 2017
Savox is an excellent brand and certainly one we'd recommend. Thw SW1210 would be great on the throttle.
For the steering we'd use SW0240MG
Answered by: Ben @ Wheelspin Models
ive got a nomad db8 with 100% standard electrics and my servo has broken, will this savox servo be a straight swop ?
Asked by Lewis Green on 30th September 2018
Yes, should be a straight swap as these are a standard size servo.
Answered by: Ben @ Wheelspin Models
Would this be a good upgrade for an arrma notorious 6s steering servo?
Asked by Dave B on 3rd January 2019
Yes, these would be a good step up from the stock servo with much more torque.
Answered by: Ben @ Wheelspin Models
Hi, would this be a good upgrade to go into an E-Revo 2.0? Thanks
Asked by Mathew on 4th March 2019
Yes that would work well in an E Revo 2.0
Answered by: Ben @ Wheelspin Models
FTX kanyon steering servo upgrade
Which are best ?
Asked by Nicholas Taylor on 19th August 2019
This would work well in a Kanyon - it would be a fantastic upgrade from stock.
Answered by: Ben @ Wheelspin Models
hi.. just wondered if this servo would fit in a krayton 6s v4
Asked by Adam Ward on 26th April 2020
Yes that will fit
Answered by: Ben @ Wheelspin Models
Will the savox 1210 fit on the axial scx10 ii?? Thank you
Asked by Lee George on 22nd May 2020
Yes that should fit fine
Answered by: Ben @ Wheelspin Models
Hi, is this compatible with the rustler VXL and the TSM? Thanks
Asked by Fernando on 12th June 2020
Yes that should work fine
Answered by: Ben @ Wheelspin Models
Can I use a 7.4v lipo with these servos?
Asked by Andrew on 11th July 2020
No, they are rated at 6v max
Answered by: Ben @ Wheelspin Models
Would two of these servos be over kill for a traxxas summit 1/10
Asked by Michael on 14th September 2020
That would give mountains of torque.
Not necessarily overkill, but certainly beefy!
Answered by: Ben @ Wheelspin Models
Would this servo be OK in axial scx 10.iii on 3s ?
Asked by Darren on 3rd November 2020
Yes that should be fine, so long as your ESC is outputting 6v BEC voltage (it should be)
Answered by: Ben @ Wheelspin Models
Would this work well with an 8s limitless?
Asked by Alexander on 3rd December 2020
Yes this would be a fantastic option for thie limitless.
Answered by: Anthony @ Wheelspin Models
Would this fit a arrama typhon 6s v4 wighout altering the servo carrier cheers
Asked by Glenn Morris on 6th January 2021
Yes pretty sure they fit no issue
Answered by: Ben @ Wheelspin Models
Will this fit arrma big rock v3
Asked by Mike on 26th February 2021
Yes that should fit
Answered by: Ben @ Wheelspin Models
Is suitable it for a axial wrangler SCCX 3 rtr
Asked by Ward Pinkney on 1st March 2021
Yes that should work nicely in there
Answered by: Ben @ Wheelspin Models
Hi can you recommend a dig servo for axial wrangler scx 10 3 standard lasted less than 1 hour from new
Asked by Ward Pinkney on 21st March 2021
These will work nicely - Savox is a great brand and very reliable
Answered by: Ben @ Wheelspin Models
would it fit in my UDR?
Asked by Arnoldas on 13th May 2021
Yes that should fit
Answered by: Ben @ Wheelspin Models
Will this improve my braking on my km baja from the stock part,it has more torque?Will it fit
Thanks Ian
Asked by Ian Taylor on 8th June 2021
yes, this is a high torque servo so is a good upgrade and will improve the braking force
Answered by: Simon @ Wheelspin Models
Hi would this be a good upgrade for arrma felony steering servo or which other steering servo would you recommend thanks
Asked by Nigel on 9th August 2021
Yes that should work well in there
Answered by: Ben @ Wheelspin Models
Good morning. Will this servo be ok in a Capra. Thanks Arron.
Asked by Arron on 18th August 2021
Yes this will work well in a Capra.
Answered by: Ben @ Wheelspin Models
Hi can I use this servo to Arrma Kraton 6s v5. I
Asked by Michal Rybczynski on 5th September 2021
Yes that should work nicely in there
Answered by: Ben @ Wheelspin Models
Hi I have arrma kraton 6s v5 can you recommend to that servo what servo horn I must use?
Asked by Michal on 8th September 2021
Use the fast311b horn as this is also an alloy unit.
Answered by: Anthony @ Wheelspin Models
Is this a good upgrade for a traxxas trx4
Asked by George on 2nd April 2022
Yes this is a good upgrade for that car but you will need a servo extension as the wire is shorter than the standard servo, have a look at ET0731
Answered by: Si @ Wheelspin Models
Dear Sirs,
Will this make a direct replacement fit to an ARRMA Granite 3s please?
I am considering which may be the most durable / long-lasting for my son's car which has suffered premature steering servo failure (and had struggled to work properly prior to this) - Many Thanks - Robert
Asked by Robert Camplejohn on 19th April 2022
This will fit however you may need to change the servo saver depedning on the version you have.
Answered by: Frank @ Wheelspin Models
Hi there
Iv just purchased a trx4 defender
And would like to change both motor and servo
The motor I was looking at is the hobbywing fusion 2in1 2300kv
I see you have this in stock
I also wanted a Savox SW1210SG
What I wanted to know is would both work inside my trx4
Plus would this motor and esc work fine without glitches with this servo
And no need to install a external bec
If so please if someone can get back to me as I’m looking to purchase both along with other items
25 spline servo horn
Savox cable extension
Plus a short wheel base for the trx4
Iv used you guys now a few times and really appreciate the service
Thanks so much
Sunny Singh
Asked by Sunny Singh on 16th June 2022
Yes thes would fit in that car and work without any issues together, the only thing you would need is a servo extension wire as the lead on the servo is not long enough to reach the radio box. have a look at ET0731
Answered by: Si @ Wheelspin Models
Would this be a straight swap in a rival mt10?
Asked by Matt on 2nd August 2022
Yes it would be a direct replacement .
Answered by: Steve W @ Wheelspin Models