Key Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
Overview
The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
Compatible Products E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2) EFLA1030B is compatible with EFL2725, EFL2900, EFL3100, EFL3100E, EFL3180, EFL4450, EFL4750, EFL4950, EFL4975, EFL6750, EFL6775, EFL6850, EFL6875, HBZ8200, HBZ8280, PKZ1950, PKZ1975, PKZ4200, PKZ4275, PKZ4300, PKZ4375, PKZ4400, PKZ4475, PKZ4480, PKZ4600, PKZ4675, PKZ4700, PKZ4775, PKZ4975, PKZ4980, PKZ5075, PKZ5080, PKZ5175, PKZ5180, PKZ5275, PKZ5375, PKZ5380, PKZ5475, PKZ5575, PKZ5580, PKZ5775, PKZ5780, PKZ5975, PKZ5980, PKZ6075, PKZ6080, PKZ6975, PKZ6980, PKZ8150, PKZ8175, PKZ8275
E Flite 30 Amp Pro Switch Mode BEC Brushless ESC (V2) Specfications:
- BEC Voltage: 3.5A continuous
- Brakes: Yes
- Input Connector Types: EC3
- Input Voltage: 10.8–14.8V
- Maximum Burst Current: 35A
- Maximum Continuous Current: 30A
- Output Connector: 3.5mm Bullet
