E Flite Blade mCP X 2 - RTF
Brand: Blade
Part No: BLH3600UK2
SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
Why not contact our team to see if an alternative is available?
The E Flite Blade MCP X has just been revamped to version 2 specification with the following new features:
- Swashplate Ball Link Dampeners
- Digital 3-Axis AS3X sensor
- Higher-output 30C Battery
- Large Diameter Tail Rotor
The E Flite Blade mCP X the lightest flybarless helicopter in its class. An ultra-micro collective pitch helicopter, it is designed for intermediate to advanced pilots. More specifically the blade mCP X will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Obviously the lower cost involved also makes it a much more economical alternative when learning.
This Ready to Fly (RTF) version of the E Flite Blade mCP X comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM receiver, ESCs, gyros and a mode 2 2.4GHz DX4e DSM2 transmitter.
As well as the heli itself in the box are two 1S 200mAh 30C batteries, a single port charger with AC adapter and a 1s High Current Ultra-Micro Battery adaptor lead. Also included are a pair of optional fast-flight main rotor blades for when confidence has grown. Transmitter batteries are also included.
Using an integrated Flybarless system, this awesome little heli to gets up in the air without a mechanical flybar. The benefits of this system provides reduced drag on the main rotor head which results in more power, longer flight times, and provides the pilot the best of both worlds between stability and agility.
The Blade mCP X is the ultimate ultra micro heli experience. Its revolutionary GX3™ flybarless system, the most advanced on any ultra micro heli, delivers a level of power and cyclic response that is second to none. This, combined with the exceptionally small, lightweight mCP X airframe makes it possible to precisely fly extreme aerobatics in spaces no larger than a living room or conference room.
| E Flite Blade mCP X RTF Mode 2 Specifications: | |
|---|---|
| Type: | Flybarless Ultra Micro Helicopter |
| Main: | Rotor Diameter 245mm (9.65 in) |
| Length: | 235mm (9.25 in) |
| Height: | 93mm (3.65 in) |
| Tail Rotor: | 36.5mm (1.4 in) |
| Weight: | 45.5 g (1.6 oz) |
| Batteries: | 1S 3.7V 200mAh 30C LiPo |
| Charger: | E-flite™ Celectra™ DC LiPo balancing charger and AC power supply plus High-Current Ultra Micro Battery Adapter Lead |
| Radio (RTF): | Spektrum™ DX4e 2.4GHz DSM™ transmitter with 4 AA batteries |
Secured by Stripe
- Brand: Blade
- Part No: BLH3600UK2
- Barcode: 605482017098
- Flying Style: Collective Pitch
- Power: Electric
- Build Level: RTF (Ready to Fly)
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.
1s High Current Ultra Micro Battery Adaptor Lead
Blade mCP X Landing Skid and Battery Mount
1.9gm Linear Long Throw Ball Bearing Servo
Blade mCP X Main Rotor Hub with Hardware
Blade mCP X Main Gear
#BLH3515 - E Flite Blade Micro CX OuterShaft Bearing 3x6x2mm (2)
Blade mCP X Main Blade Grips with Bearings ** CLEARANCE **
Blade mCP X Servo Pushrod Set with Ball Link (3)
Blade mCP X Hardware Set
Blade mCP X Fast Flight Main Rotor Blade Set with Hardware
Blade mCPX2 Tail Boom Assembly with Tail Motor/Rotor/Mount (Replaces BLH3502)
Blade mCP X Feathering Spindle with O-rings and Bushings
Blade mCP X Carbon Fibre Main Shaft with Collar and Hardware
E Flite Blade mSR Canopy Mounting Grommets (8) (Replaces BLH3521)
Blade mCP X Rotor Head Linkage Set (8)