ProLine Trencher 2.8 - Mounted on Black Nitro Rear Wheels

ProLine Trencher 2.8 - Mounted on Black Nitro Rear Wheels

Brand: ProLine

Part Number: PRO1170-12


SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.


Why not contact our team to see if an alternative is available?






This is a pair of Pro-Line Trencher 2.8" All Terrain Tires Mounted on Desperado Black Wheels for JATO®, Nitro Stampede®/Rustler® Rear or Electric Stampede®/Rustler® Front or Stampede 4X4 Front and Rear. Pro-Line is very excited to announce the availability of the Trencher 2.8" pre-mounted to the wheel that you need. Making your truck the toughest looking one on the block has never been easier now with the Trenchers premounted to the Desperado wheels. We take the guess work out of your glue job by doing the mounting for you so you can spend your time having fun!

Pro-Line's world class development team spent several months of research, development and testing to ensure that the Trencher 2.8" tire will perform above and beyond your expectations in any condition that you take your truck. Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher 2.8" tire is up to the task. If you only buy one wheel and tire combo for your truck, this is the one to buy!

The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Each tire lug is shaped to dig into whatever surface you are running on and is ultra-thick so that it is extremely durable. The popular Trencher tread pattern can also be found on Short Course, 40 Series Monster Truck and the Baja 5T, so if you love them on your JATO®, Stampede®, Rustler®, or Stampede® 4x4, be sure to get them all!

Trencher 2.8" Tires and Desperado 2.8" Wheels featured on Big Squid under Evan's 5 Minutes

Evan stated, "I recently got a couple sets of Pro-Line 2.8" Trencher tires and the new 2.8" Desperado wheels for my Traxxas Stampede 4x4. As you can see from the picture, they look completely awesome... Beauty is only skin deep of course, so putting these out on the track was the real test. I can honestly say that these tires and wheels woke this truck up all over again for me! The tires have better traction on every surface, and the slightly larger size makes backflips even on 2S almost easy. The foam inserts help eat up a lot of rough terrain and make the truck steer and drive more predictable... It holds a better line under power, is much more controllable on the ground or in the air, and draws plenty of attention from onlookers with the backflips and dirt roosts. After 10 or so packs on all kinds of surfaces, I see very little wear, which is also very cool. I like these tires so much I went out and got a set for my Stampede 2x4! These tires and wheels are totally tentacles!"

See Our Full Line of Pre-Mounted Tires!
Customer testimonial:
Just bought and installed a set of Pro-Line Trenchers for my VXL Rustler. I'm more than happy with how well they perform, quite surprised. Just had to email and thank you guys for the great job. I'll be buying a Pro-Line body next :) Keep up the great work! -Dakota Todd

Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear.
Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.

Please note: All tires & wheels are sold in pairs, unless otherwise noted.
Stampede®, JATO® and Rustler® are registered trademarks of Traxxas® L.P

Features

  • Horizontal H shaped tread for ridiculous amounts of traction and side-to-side stability
  • Over-sized tall tread are second-to-none in durability and longevity
  • Extremely detailed sidewall design for that tough off-road look
  • Official Pro-Line logo and Trencher name embossed on sidewall of tire
  • Made in the USA, since 1982 - Read about Pro-Line Racing's History
  • Aggressive 6-spoke wheel design
  • Molded in Bead-loc ring for scale look
  • Made out of durable nylon material

What's Included
  • Trencher 2.8" mounted on Desperado Black 12mm hex wheels (2 pcs)


Fits
  • Pro-Line PRO-MT Front or Rear
  • Traxxas® Stampede® 4x4 Front or Rear
  • Traxxas® JATO® Rear
  • Traxxas® Stampede® Nitro Rear
  • Traxxas® Rustler® Nitro Rear
  • Traxxas® Stampede® Electric Front
  • Traxxas® Rustler® Electric Front
  • Other 1:10 Monster Trucks with 12mm Hexes

Specs
Height:   4.87" (124mm)
Width:   2.86" (73mm)
     
     
     
     

  • Brand: ProLine
  • Part No: PRO1170-12
  • Barcode: 675118157184
  • Fitment: 12mm Hex
  • Pack Quantity: 2
  • Mounting Diameter: 2.8 Inch

Two Simple UK Delivery Options

Royal mail at £3.95, or Express at £6.95.

Full details at checkout.
Some items cannot be sent via Royal Mail due to their restrictions.

We Ship Worldwide!

To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.

No product reviews yet!

Do I HAVE TO change the gearing on my traxxas slash to run these wheels? I have both 2wd and 4wd both brushless?
Asked by Martin Russell on 10th December 2018

It would be recommended as they are heavier than the stock wheels - however every driver is different.

We'd always recommend checking motor/ESC temepratures and gearing accordingly.

Answered by: Ben @ Wheelspin Models

Hi, are these belted?
Asked by Mike on 2nd October 2019

No. The Trencher "HP" is belted - take a look at PL10168-10

Answered by: Ben @ Wheelspin Models

Hi, I wanted to put these on my Traxxas Slash 2wd. Would I also have to change the gearing, esc and motor? If so which parts would I need? Thanks
Asked by Tim on 11th April 2020

For the Slash you'd normally use SC fitment wheels - eg say PL1159-13 or PL1190-10

Gearing - see how you get on with the stock items and go from there :-)

 

Answered by: Ben @ Wheelspin Models

H,i can you tell me where I can find the foam inserts only for these tires please, thank you.
Asked by Alexander on 15th November 2020

You could look to use something like PL6175-00 which should fit with some minor trimming

Answered by: Ben @ Wheelspin Models

Ask a Question Write a Review