Force is a far eastern Nitro Engine manufacturer that supplies Nitro engines to many a well know RC brand. Got a HPI vehicle? Is the engine an "F", well the "F" stand for Force...
This is superb value, No other Nitro engine of this size is available at this price. Superb quality internals and compatibility with current roto starts and pull starts make Force the only choice.
Using standard clutch set up and mounting locations make this a drop in fit for the HPI Savage Nitro versions.
Suitable for...
Force .36/5.9cc Features:
Some vehicles may require alternative engine mounts though it is 100% straight fit in the HPI Savage.
This item is over £100, so qualifies for free standard UK shipping!
To see shipping costs simply add the item to your basket and choose your country from the drop down list on the view cart page.
It's very, very similar....
Answered by: Ben @ Wheelspin Models
Yes that should work fine with OS number 8 plugs
Answered by: Ben @ Wheelspin Models
I'm 99% sure it's a no on that. Any standard exhaust gasket and collet will fit though
Answered by: Ben @ Wheelspin Models
Last batch of these we had came with a 12mm OWB
Answered by: Ben @ Wheelspin Models
Now resolved
Answered by: Ben @ Wheelspin Models
That does depend a little on what you're fitting it into? However pretty much any standard clutch should fit. Some nice options would be say TLR342014 or TLR9101 or REDMUQU0063
Answered by: Ben @ Wheelspin Models
It's been a while since I've seen one of those, but I checked with Losi who advise your .32 2-stroke should have standard big block mounting dimensions - so ye, this should fit
Answered by: Ben @ Wheelspin Models
Answered by: Si @ Wheelspin Models
No, this would not fit any engine .21 or above is a big block engine and would not fit. you would need a small block engine so anything from .12 to .18 size
Answered by: Si @ Wheelspin Models
A rough factory setting for most engines is
3.5 turns from closed on the main needle
flush with the housing on the second needle
Then about a 1mm gap in the carb for the idle
Answered by: Si @ Wheelspin Models
Yes that will fit , we have not fitted one to that so cannot say which mounts would work but more than likely you will be able to use your standard ones.
Answered by: Steve @ Wheelspin Models
That is 12mm hex and it does not come with a glow plug usually.
Answered by: Steve @ Wheelspin Models