Multi-purpose for Most Chemistries With Generic XT60 SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of
Multi-purpose for Most Chemistries With Generic XT60SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports. It is not only compact in size but also powerful in output with maximum 100W charging power and 5A charging current which makes charging more efficient. With the new AGM and cold charge modes, the user is free to charge their PB and AGM batteries on cold days.
Twin-channel ChargerSkyRC T100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically initiate the charging of 2 batteries at once to their maximum capacity. To top it all, the batteries being charged do not even need to have the same configuration. You can connect different chemistry(NiMH / NiCd / LiPo / LiFe / Lilon / LiHV / Pb)batteries into any of the charging ports.
AGM & Cold Charge Modes for PB BatterySkyRC T100 can charge AGM(Absorbent Glass Mat) battery and also can be used for charging PB battery at very low temperatures.
Embedded XT60 Battery ConnectorBy embedding the XT60 battery connector in the charger, it is more convenient & safer for charging the most popular battery with XT60 connector and avoid the possibilities of reverse polarity for it.
SpecificationsSize and Weight
Case Material: Plastic
Case Size: 90x100x127mm
Weight: 500g
DisplayDisplay Type: 2x16LCD
Display Backlight: Blue
PowerInput Voltage: AC 100-240V
Charge Wattage: 50Wx2
BatteryBattery Types/Cells:
LiPo/LiFe/LiIon/LiHV: 2-4 cells
NiMH/NiCd: 6-8 cells
Pb:6/12V
Battery Capacity Range:
LiPo/LiIon/LiFe/LiHV:100-50000mAh
NiMH/NiCd:100-50000mAh
Pb: 100-50000mAh
Charge and DischargeCharge Voltage
LiPo: 4.18-4.25V/cell
LiFe: 3.58-3.7V/cell
LiIon: 4.08-4.2V/cell
LiHV: 4.25-4.35V/cellNiMH/NiCd: Delta peak detection: 3-15mV/cell ; Default: 4mV/cell
Discharge Cut-off Voltage
LiPo:3.0-3.3V/cell
LiFe:2.6-2.9V/cellLiIon: 2.9-3.2V/cell
LiHV: 3.1-3.4V/cellNiMH/NiCd:0.1-1.1V/cell
Charge Current: 0.1A-5.0A
Balance Cells: 2-4 cells
Balance Current: 300mA/cell
Safety Timer: 1-720minutes & OFF
Charge Method:CC/CV for Lithium batteries.
Delta-peak Sensitivity for NiMH/NiCd batteries.
CC/CV and float charge for PB batteries.
InstructionsIncludes UK 240v input lead and no charge or balance leads.
Does this come with a balance board? Do I need one for charging li-fe cells in my transmitter and a standard RX pack thanks
Asked by Martyn Perks on 28th April 2020
The balancers plug directly into the ports on the charger.
Answered by: Ben @ Wheelspin Models
What balance board would I need for charging two 2s 50c 5500mah lipo batteries at the same time?
Asked by Ciaran on 4th May 2020
No board required - XH balancers are on the front of the charger
Answered by: Ben @ Wheelspin Models
What are the differences between this and the T200 in terms of charging time? I usually charge 2x 5000mah 4s or 1x 5000mah 4s and a 3000mah NImh ath the same time. Will the T200 be significantly quicker?
Asked by Jon on 12th June 2020
Depends on your battery spec - we would charge at 1C, so eg 5A on a 5000mah battery so charge time should be the same, however if you are charging big batteries this will have the power to deliver 1C to both packs at the same time
Answered by: Ben @ Wheelspin Models
Can I storage charge a Lipo with this?
Asked by Alex on 29th September 2020
Yes they have a storage charge program
Answered by: Ben @ Wheelspin Models
Hi what leads and balance board would I need for charging 3s lipos with ec5 connector
Asked by Paul on 15th October 2020
You could use CR739 to charge EC5 batteries on this.
Answered by: Ben @ Wheelspin Models
Does this come with a power supply?
Asked by Stuart on 20th October 2020
Yes, integrated AC Power supply on these
Answered by: Ben @ Wheelspin Models
Does this charge the traxxas slash version of batteries
Asked by R Wellman on 17th December 2020
In theory, with an adapter it could do - but it would be much easier to use a Traxxas ID charger
Answered by: Ben @ Wheelspin Models
Do i need to buy connecters or do i need to buy them
Asked by Phillip Wickens on 22nd January 2021
These have XT60 ports built into the front so if your batteries have XT60, they will plug straight in.
If your batteries use other connectors you will need adapters eg ET0842 for deans
Answered by: Ben @ Wheelspin Models
Dies this come with a mains plug?
Asked by Charlie Harris on 18th March 2021
Yes this comes with a UK mains plug
Answered by: Ben @ Wheelspin Models
Good evening! Is this charger suitable for charger 11.1 v and 7.4 v Lipo batteries for airsoft guns
Asked by Ian on 20th July 2021
If your batteries have standard XT60 connections then yes no reason why this won't work
Answered by: Ben @ Wheelspin Models
Hi I have a 5000mah 4s lipo and just wondering what amp you put it on for storage mode
Thanks
Asked by Kevb on 1st November 2021
It all depends on your charger, the manual will give you the options you have.
Answered by: Anthony @ Wheelspin Models
SCH-SK-100162
Hi guys I’m looking into investing in a duel charger … is this something you would recommend ?
Many thanks
Asked by James Towey on 3rd January 2022
This is a good budget dual charger yes, If you wanted something a little better you would look at SCH-SK-100131
Answered by: Si @ Wheelspin Models
When it says 100w - Is this 100w output for each or 50w output for each port
Asked by Daniel Howard on 5th June 2022
Thats 100w total , 50w per channel.
Answered by: Steve W @ Wheelspin Models
Hi does charge a 1s lipo battery
I have brought but only seems to go down to 2s battery
Asked by Trevor Blades on 4th August 2022
2-4s only on this charger
Answered by: Frank @ Wheelspin Models
Would I be able to charge a 6200mah 4S, by firstly charging to the max 5 and then charging the remaining 1.2 on a second charge? I like the dual charge function, hence why I ask! Thanks
Asked by Jonny on 26th September 2022
This will charge the 6200 battery no problem, the 5 amp max just means it will do 5000mah in 1 hour so you can just leave the battery on charge for longer.
Answered by: Si @ Wheelspin Models
Hi, can I use the T100 to charge graphene lipo batteries?
Asked by John Gray on 1st November 2022
Yes it will charge LiHV batteries .
Battery Capacity Range:
LiPo/LiIon/LiFe/LiHV:100-50000mAh
Answered by: Steve W @ Wheelspin Models
Will this charge a Spektrum 5000mAh 2S 7.4V 50C Smart LiPo?
Asked by Chris on 9th March 2023
If you have a G1 smart lipo with the seperate balance lead this will work for you, if you have a G2 smart lipo without the balance lead, no this charger will not work
Answered by: Si @ Wheelspin Models
is this suitable for charging 2 x 3s lipos? is there an adaptor lead for xt90?
Asked by Peter Brookdale on 17th March 2023
Yes this will charge those lipos no problem. you would need 2 of this adapter. RDNAC010124
Answered by: Si @ Wheelspin Models